Blink tango! Bedienungsanleitung PDF herunterladen

Smart card reader

) "CONTINU/STOP" FUNCTION KEY

"CONTINU" FUNCTION : 2 methods are possible.

1) "CONTINU" FOR AN UNDETERMINED NUMBER OF CYCLES

a) Press the CONTINU/STOP key. The display indicates CONTINU.

b) Press the key of the desired cycle. The cycles are carried out.

c) Press the cycle key again to stop at the end of the running cycle or the

CONTINU/STOP key to stop the cycle instantaneously.

2) "CONTINU" FOR A DEFINED NUMBER OF CYCLES

a) Press the CONTINU/STOP key. The display indicates CONTINU.

b) Press repeatedly the CONTINU/STOP key as many times as you wish to do

continuous cycles . The number is indicated on the display. To decrease the

displayed number, maintain the key pressed until you reach the desired value.

c) Select the desired key. The cycles will be carried out until the displayed number.

Note :

If an odd number is displayed and a 2-cup cycle has been selected, the machine will

stop at the penultimate cycle. The light of the corresponding 1-cup cycle will blink to

show you that you must press the key of the 1-cup cycle to do the number of cycles

previously defined.

"STOP" FUNCTION :

The CONTINU/STOP key allows the immediate stopping of any running cycle.

The start key of the cycle also allows the immediate stopping of a simple cycle, or the

stopping at the end of the running cycle in the case of multiple cycles

("CONTINU" function or parameter N>1).

B) MANUAL CYCLE SELECTION KEYS

This key allows you to make coffees from "ground coffee" which has been put manually

into the ground coffee trap :

a) Press the selection key "Manual cycles". The lights of the available keys blink in

orange.

b) When you open the trap, the lights stop blinking and remain orange.

c) Put in the ground coffee dose within 10 seconds and close the trap.(1 or 2 doses )

d) Choose and press a key with an orange light : the corresponding cycle will start.

Nota: to cancel a manual cycle, press the CONTINU/STOP key.

C) GRINDERS SELECTION KEY

(according to the version and to the grinders preset)

Permits selection of the green or red grinder, the coffee keys will light up according to

the selection (red or green) and the cycle will use the selected grinder.

The modification of the grinders preset is possible only with the technician card.

 START UP

Only do this when the machine has been installed and, the connections and

adjustments have been carried out by a qualified installer. (Do not forget to open the

water tap feeding the machine ! )

I) TURNING THE MACHINE ON

Put the main On/Off switch on position 1. The display of the central box must be lit.

- If the display indicates "STOP", press the 0/1 key to switch on the machine.

- If the display indicates "NIGHT POSITION", press the Day/Night key to put the

machine in Day position. The filling of the boilers is carried out automatically, then the

heating starts.

c 0/1 KEY:

Permits switching the machine on or off.

On position : All the lights of the keyboards are lighted and on the display of the

central box is displayed "UNIC TANGO" or "UNIC TANGO/S" according to the

configuration.

Off position : All the lights of the keyboards are extinguished and on the display of the

central box is displayed : "……..STOP……."

Caution:

The machine is always on. To switch it off, put the main switch on 0.

d DAY/NIGHT KEY :

Day position : in this position, the keys are activated and the lights lighted.

Night position : stand-by position, the machine is on a reduced temperature of 70°C.

The keys are not activated and all the lights of the keyboards are extinguished .

e KEY GIVING ACCESS TO THE CLEANING OPERATIONS

f KEY TO READ THE COUNTERS

)

COFFEES L. = 0008286

)

COFFEES R. = 0006199

)

COFFEES SUM = 0014485

g MENU KEY :

Permits access to the list of the main functions.

h and i + / - KEYS

Permits access to each function and modification of the displayed values.

j PRO KEY:

Permits entry into programming mode on the desired key or function after selecting the

menu by the MENU key and then pressing +/-.

MEANING OF THE DISPLAY SYMBOLS

The display is composed of 2 lines. Generally, the upper line indicates the value of the

parameters, and the lower line gives some information on the mode of operation and the

actions to be carried out. Consequently, to carry out the reading or programming

sequences, you just have to follow the messages displayed on the lower line on the

display.

Display Meaning

> + / -

Press ( + ) or ( - ) to change function on MENU, the pages of the functions, or

modify the blinking parameter .

> PRO 3 Press (PRO) for 3 seconds to select the displayed function.

> PRO

Press (PRO) to select the parameter to be modified which starts blinking, or

to validate the blinking parameter and pass on to the following one.

> MENU Press (MENU) to leave the function, after validating it by (PRO).

> KEY

Press a key of the right or left keyboard to make its parameters appear or to

configure it.

■ ELECTRONIC BOXES

ELECTRONIC CENTRAL BOX

- When the working temperatures are reached, the machine launches automatically some

initializing phases during which the display indicates Autocontrol 1 then Autocontrol 2.

These initializing phases are very important for the correct functioning of the machine.

These are possible only if the drawer is in its place, and they must not be stopped

especially not by removing the drawer.

When the buzzer stops sounding and the lights stops blinking, the machine is ready to

make coffee.

ll the lights of the keys are lit and the display indicates : "UNIC TANGO"

II) USE OF THE COFFEE UNITS

On the unit, you can obtain up to 8 different programmable beverages (according to the

version)

1. Place the cup or cups under the telescopic coffee outlet after adjusting the height if

necessary according to the type of cups.

2. Press the chosen key after checking that the color of the light corresponds to the

grinder you wish to use.

3. During the cycle, the light of the key is blinking to indicate that the cycle is running.

The other "coffee" keys of the keyboard are extinguished and will be relit at the end

of the cycle.

Notes:

For the hot water, steam, hot milk, milk foam keys..., the lights are orange.

For the keys operating some "coffee" cycles, the color of the lights corresponds to the

selected grinder which is to be used for the next cycle:

RED: left grinder // ORANGE: ground coffee trap // GREEN: right grinder

III) WASTE DRAWER

ccording to the number of cups made and to the programmed capacity, a message on

the display indicates when it is necessary to empty your waste drawer. You can empty it

at any time or control its filling level. For that, you just have to:

1. Remove the drawer.

2. Empty the drawer or check its content

3. Put the drawer back in place and close the door.

4. Validate by pressing the ( + ) key for 3 seconds if you have emptied the drawer, and

the key ( - ) if you have not emptied the drawer.

Caution : if you have made a mistake during the validation, it is advised to take

out the drawer, to empty it if it is not empty and then validate it by pressing ( + )

for 3 seconds, after having put back the drawer.

DISPLAY

PRO

0 1

PRO

0 1

1 4

5 8

STEAM

HOT WATER

COFFEE CYCLE ( JUG )

MILK FOAM

HOT MILK

CONTINU / STOP

SELECTION

FOR MANUAL

CYCLES

GRINDER

SELECTION

UNIT ELECTRONIC BOX

According to the equipment of your machine and the chosen keyboard version, some keys may not be present on your machine.

COFFEE CYCLE

( 1 AND 2 CUPS )

CAPPUCCINO CYCLE

( 1 AND 2 CUPS )

COFFEE + MILK

CYCLE

( 1 AND 2 CUPS )

Coffee hopper

Central electronic box

steam outlet .

Telescopic coffee outlet

Waste drawer

Main switch .

Door .

Telescopic

hot water outlet

Keyboard 10 keys .

Cup warmer .

Ground coffee trap .

1 2

Inhaltsverzeichnis

Seite 1 - ■ ELECTRONIC BOXES

Smart card readerA) "CONTINU/STOP" FUNCTION KEY"CONTINU" FUNCTION : 2 methods are possible. 1) "CONTINU" FOR AN UNDETERM

Seite 2 - INSTRUCTIONS FOR USE

Dear Customer,You have just purchased a TANGO Uno coffee machine incorporating "UNIC" know-how acquired from the experience of over 70 years

Kommentare zu diesen Handbüchern

Keine Kommentare

Blink tango! Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kaffeezubehör Blink tango! herunter. FR9122 notice d`utilisation tango uno E.dft - UNIC-USA Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern