
- 1 -
1. OUTLINE
This troubleshooting flowchart has been prepared for the repair of each board assembly of the
Microline 320/321 TURBO printer. The repairmen using this manual are assumed to be familiar
with certain techniques.
1.1 Items to Check Before Repair
• Check the inspection items specified in the instruction manual.
• Find out as many details of the trouble as possible from the customer.
• Inspect in the conditions as close as possible to those at the time the trouble occurred.
• Proceed with the repair as follows:
Check the trouble status according to Table 1.1 for the details of the trouble. Then, locate the
trouble position according to the detailed flowchart.
• Carry out a thorough test after the repair to check for correct functioning.
1.2 Troubleshooting
Table 1.1
Trouble contents Surmise of troublleStatus
Power is not supplied
No spacing operation
Homing does not end
normally
Paper jam while paper
insertion
Smearing/Missing dots
Faint or dark print
Ribbon feed trouble
Line feed trouble
Malfunction of switch on
operation panel.
Data receiving failure
Transformer, Power & Control Board, Driver Board, Operation Panel.
Space motor, carriage Cable, Print Head.
Space Motor, Carriage Cable, Spacing Mechanism, Driver Board
Pressure roller Mechanism, Support Protector, Pull up roller cover.
Print Head, Power & Control Board, Space Motor, Carriage Cable,
Driver Board
Print Head, Ribbon feed assembly, Power & Control Board, Driver
Board
Ribbon feed assembly, Space motor, Power & Control Board, Driver
Board
LF motor, Platen assy, LF mechanism, Power & Control Board, Driver
Board
Operation Panel, Power & Control Board, Driver Board
Power & Control Board, (I/F/P.C.B), I/F Cable, Menu setting, Driver
Board
Trouble upon
power on
Trouble
during
printing
Note: Refer to the Maintenance Manual for the troubleshooting flow chart of this table.
Kommentare zu diesen Handbüchern